How to lay artificial Grass?
INTEGRAL GRASS: +90 212 678 13 13
Artificial grass has seen a rise in popularity in recent years. With its easy upkeep and year-round vibrancy, it’s easy to see why. It is available in a range of textures and shades and can be fitted to any place
laying process of artificial grass on grounds
contain a lots of steps
its most important leveling process and remove the stones
– rubbish and move it away
Apply a thin aggregate layer of sand, crushed stone or grit over the membrane. Compact it to create a solid base. This layer will provide you with a firm, well-draining surface that will support the rest of the materials
Once the layer of aggregate is in place, apply (1 to 2 cm) layer of sharp sand. Compact the sand and level it, smoothing the surface using a piece of wood or a flat board with a level
Extend layer of fibers, which this layer of shock-absorbent material
After that, apply a thin layer of adhesive on the surface beneath the joint to stop the two pieces from shifting or buckling. And to seem one carpet
Cut the turf to the shape you want
Wait until the artificial turf is in place and completely covers the desired area. Use a utility knife to cut along the edges
Nail the grass into place
First, make sure the grass is the correct shape and size. Start by securing each corner, then insert nails every 12 to 16 inches along each edge. Use adhesive if you are covering a vertical surface
Apply a layer of silica sand
Apply a thin layer of silica sand directly to the lawn surface. Use a spreader to ensure even coverage. This will help to provide a stabilizing effect on the artificial grass and will help to prevent it from moving.
Brush the sand into the grass
Using a coarse broom, brush the sand into the grass. The grass will require little upkeep, although if the blades become flattened, lift them by sweeping them with a broom.
Integral Artificial grass info : https://www.integralgrass.com/artificial-grass/